ASRock Notes Table of Contents 1. Setting Fan Thresholds 1.1. Configure 2. Troubleshooting 2.1. Can’t Reach the BMC from Certain Hosts 1. Setting Fan Thresholds This will need to be done via a host where Linux is installed. 1.1. Configure All IP addresses should point to the IP of the BMC and not the IP of the host. Configure 4 Fans ipmitool -I lanplus -H 192.168.1.224 -U admin sensor thresh FAN6_1 lower 300 400 500 2. Troubleshooting 2.1. Can’t Reach the BMC from Certain Hosts This BMC has a built-in FW. Goto Setting System Firewall IP Firewall Rules Existing IP Rules Clear IP Addresses